Ethernet Management

nmrs supports wired (Ethernet) connections through NetworkManager. Ethernet connections are simpler than Wi-Fi since they don't require authentication in most cases.

Connecting

use nmrs::NetworkManager;

#[tokio::main]
async fn main() -> nmrs::Result<()> {
    let nm = NetworkManager::new().await?;

    nm.connect_wired().await?;
    println!("Ethernet connected!");

    Ok(())
}

connect_wired() finds the first available wired device and either activates an existing saved connection or creates a new one with DHCP. The connection will activate when a cable is plugged in.

Listing Wired Devices

use nmrs::NetworkManager;

#[tokio::main]
async fn main() -> nmrs::Result<()> {
    let nm = NetworkManager::new().await?;

    let wired = nm.list_wired_devices().await?;
    for device in &wired {
        println!("{}: {} [{:?}]",
            device.interface,
            device.device_type,
            device.state,
        );
        println!("  MAC: {}", device.identity.current_mac);
        if let Some(ip) = &device.ip4_address {
            println!("  IPv4: {}", ip);
        }
        if let Some(driver) = &device.driver {
            println!("  Driver: {}", driver);
        }
    }

    Ok(())
}

Errors

#![allow(unused)]
fn main() {
use nmrs::{NetworkManager, ConnectionError};

let nm = NetworkManager::new().await?;

match nm.connect_wired().await {
    Ok(_) => println!("Connected"),
    Err(ConnectionError::NoWiredDevice) => {
        eprintln!("No Ethernet adapter found");
    }
    Err(e) => eprintln!("Error: {}", e),
}
}

How It Works

When you call connect_wired():

1. nmrs finds the first managed wired device
2. Checks for an existing saved connection for that device
3. If a saved connection exists, activates it
4. If no saved connection exists, creates a new profile with DHCP and activates it
5. Waits for the connection to reach Activated state

The connection profile is saved for future use, so the device will auto-connect when a cable is plugged in.

Next Steps

• Device Management – list all network devices
• Connection Profiles – manage saved Ethernet profiles
• Error Handling – handle connection errors